Secure Power SP203 Información técnica descargar pdf (Pagina 54)

Management

ProSAFE Single Band 802.11n Wireless Access Point WN203

After successful login, the > prompt displays, preceded by the name of the wireless

access point.

3. Enter the CLI commands that you want to use.

You can enter ? to display the available CLI commands. The CLI commands are also

listed in

Appendix B, Command-Line Reference.

Upgrade the Wireless Access Point Software

The software of the wireless access point is stored in flash memory and can be upgraded as

NETGEAR releases new software. You can download upgrade files from the NETGEAR

website. If the upgrade file is compressed (.zip file or .rar file), you first need to extract the

image file (.bin file) before sending it to the wireless access point. You can send the upgrade

file using your browser. The following sections describe the two methods that are available to

perform a software upgrade:

• Web Browser Upgrade Procedure

• TFTP Server Upgrade Procedure

Note: The web browser that you use to upload new firmware into the

wireless access point needs to support HTTP uploads. Use a

browser such as Microsoft Internet Explorer 8.0 or later, or Mozilla

Firefox 18.0 or later.

Note: You cannot perform the software upgrade from a computer that is

connected to the wireless access point over a wireless link. You

need to use a computer that is connected to the wireless access

point over an Ethernet cable.

WARNING:

When uploading software to the wireless access point, do not

interrupt the web browser by closing the window, clicking a link,

or loading a new page. If the browser is interrupted, the upload

might fail, corrupt the software, and render the wireless access

point inoperable.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 132 133

Sin comentarios

Secure Power SP203 Información técnica Pagina 54